B1A20
B1A20-PRE-ARM TIMEOUT
- When Monitored:
During the VTSS pre-arm process.
- Set Condition:
If the VTSS pre-arm sequence is interrupted within sixteen seconds after securing the vehicle.
DETERMINING IF DIAGNOSTIC TROUBLE CODE (DTC) IS CURRENT
NOTE: Diagnose any related Communication DTCs before continuing.
1. With a scan tool, read and record DTCs.
2. With the scan tool, clear DTCs.
3. Turn the ignition off and remove the key from the ignition.
4. Lock and close all doors to allow the VTSS to go from pre-arm to armed status and wait one minute.
5. Disarm the VTSS.
6. Using the scan tool, read DTCs.
Does the DTC reset?
Yes
- Remove the Cluster and inspect the Fused B (+) and both CAN B BUS circuits for spread terminals or intermittent opens.
- Perform the WIN VERIFICATION TEST. See: Verification Tests/Vehicle Theft Security Verification Tests/Wireless Ignition Node (WIN)
Verification Test
No
- DTC is not active at this time. Test complete.
- Perform the WIN VERIFICATION TEST. See: Verification Tests/Vehicle Theft Security Verification Tests/Wireless Ignition Node (WIN)
Verification Test
B1A20-PRE-ARM TIMEOUT
- When Monitored:
During the VTSS pre-arm process.
- Set Condition:
If the VTSS pre-arm sequence is interrupted within sixteen seconds after securing the vehicle.
DETERMINING IF DIAGNOSTIC TROUBLE CODE (DTC) IS CURRENT
NOTE: Diagnose any related Communication DTCs before continuing.
1. With a scan tool, read and record DTCs.
2. With the scan tool, clear DTCs.
3. Turn the ignition off and remove the key from the ignition.
4. Lock and close all doors to allow the VTSS to go from pre-arm to armed status and wait one minute.
5. Disarm the VTSS.
6. Using the scan tool, read DTCs.
Does the DTC reset?
Yes
- Remove the Cluster and inspect the Fused B (+) and both CAN B BUS circuits for spread terminals or intermittent opens.
- Perform the WIN VERIFICATION TEST. See: Verification Tests/Vehicle Theft Security Verification Tests/Wireless Ignition Node (WIN)
Verification Test
No
- DTC is not active at this time. Test complete.
- Perform the WIN VERIFICATION TEST. See: Verification Tests/Vehicle Theft Security Verification Tests/Wireless Ignition Node (WIN)
Verification Test
