B1D62
B1D62-POWER SEAT SWITCH STUCK
- When Monitored:
Continuously.
- Set Condition:
When the Memory Seat Module detects the switch engaged in an active position for over 50 seconds, this code will set.
TEST FOR INTERMITTENT CONDITION
1. Turn the ignition on.
2. With the scan tool, record and erase DTC's
3. Press the Seat Switch in all directions several times.
4. Wait one minute.
5. With the scan tool, read DTC's.
Does the scan tool display B1D62-POWER SEAT SWITCH STUCK?
Yes
- Replace the Driver Seat Switch as necessary.
- Perform POWER SEAT SYSTEM VERIFICATION TEST. See: Verification Tests/Power Seat System Verification Test.
No
- The conditions that caused this code to set are not present at this time. Using the wiring diagram/schematic as a guide, inspect the wiring and
connectors.
- Perform POWER SEAT SYSTEM VERIFICATION TEST. See: Verification Tests/Power Seat System Verification Test.
2010 Jeep Truck Grand Cherokee SRT-8 V8-6.1L Page 416
