Jeep Truck Grand Cherokee 4WD V63.7L Technical Service Bulletin #0800410
Page 96
Date: 100302
Entertainment System Disabling Front Seat Video Source
NUMBER: 0800410
GROUP: Electrical
DATE: March 2, 2010
THIS BULLETIN SUPERSEDES SERVICE BULLETIN 080022007 DATED FEBRUARY 6, 2007. THIS IS A COMPLETE REVISION
AND NO ASTERISKS HAVE BEEN USED TO HIGHLIGHT REVISIONS.
SUBJECT:
Radio Video Disable Update
MODELS:
2010 (D1) Ram Truck (3500 Pick Up)
2010 (DJ) Ram Truck (2500 Pick Up)
2009 2010 (DS) Ram Truck (1500)2010 Jeep Truck Grand Cherokee 4WD V63.7L
2008 2009 (HB) Durango
20082009 (HG) Aspen
20082010 (JC) Journey
2007 2010 (JK) Wrangler
2007 2010 (JS) Sebring/Avenger/Sebring Convertible
20072010 (KA) Nitro
20082010 (KK) Liberty
2008 2010 (LC) Challenger
2008 2010 (LX) 300/ 300C, Charger
20092010 (MK) Patriot
20082010 (ND) Dakota
20082010 (PM) Caliber
2008 2010 (RT) Town & Country/Grand Caravan
2008 2010 (WK) Grand Cherokee
2008 2010 (XK) Commander
Page 97
NOTE:
This bulletin applies to vehicles equipped with a Hard Drive Radio (sales code REN, RER, REU, RBZ, RHR).
NOTE:
Refer to Warranty Bulletin D0704 for additional information and a listing of affected states.
DISCUSSION:
Due to certain state regulations, a function for disabling the front seat video option has been incorporated into the vehicle. This function
will enable or disable the radio's ability to play video in the front seat. If enabled, the radio will play video when the vehicle is in Park
(Automatic Transmission) or when the parking brake is set and vehicle speed is zero (Manual Transmission). If disabled the radio will
NOT play video in the front seat in any operating mode. If it becomes necessary to disable the front seat video option, use the following
procedure.
NOTE:
Using the wiTECH Diagnostic Application for flashing an ECU is made available through the wiTECH Diagnostic Application. For
instructions select the "HELP" tab on upper portion of the wiTECH window, then "HELP CONTENTS." This will open the Welcome to
wiTECH Help screen were help topics can now selected.
1. Connect the wiTech
2. From the Home Screen select Radio
3. Select "Misc. Functions"
4. Select "Enable/Disable Front Seat Video"
5. Select "Enable" or "Disable" as required by your state laws.
6. Select finish to exit.
POLICY:
Information Only
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.
Page 96
Date: 100302
Entertainment System Disabling Front Seat Video Source
NUMBER: 0800410
GROUP: Electrical
DATE: March 2, 2010
THIS BULLETIN SUPERSEDES SERVICE BULLETIN 080022007 DATED FEBRUARY 6, 2007. THIS IS A COMPLETE REVISION
AND NO ASTERISKS HAVE BEEN USED TO HIGHLIGHT REVISIONS.
SUBJECT:
Radio Video Disable Update
MODELS:
2010 (D1) Ram Truck (3500 Pick Up)
2010 (DJ) Ram Truck (2500 Pick Up)
2009 2010 (DS) Ram Truck (1500)2010 Jeep Truck Grand Cherokee 4WD V63.7L
2008 2009 (HB) Durango
20082009 (HG) Aspen
20082010 (JC) Journey
2007 2010 (JK) Wrangler
2007 2010 (JS) Sebring/Avenger/Sebring Convertible
20072010 (KA) Nitro
20082010 (KK) Liberty
2008 2010 (LC) Challenger
2008 2010 (LX) 300/ 300C, Charger
20092010 (MK) Patriot
20082010 (ND) Dakota
20082010 (PM) Caliber
2008 2010 (RT) Town & Country/Grand Caravan
2008 2010 (WK) Grand Cherokee
2008 2010 (XK) Commander
Page 97
NOTE:
This bulletin applies to vehicles equipped with a Hard Drive Radio (sales code REN, RER, REU, RBZ, RHR).
NOTE:
Refer to Warranty Bulletin D0704 for additional information and a listing of affected states.
DISCUSSION:
Due to certain state regulations, a function for disabling the front seat video option has been incorporated into the vehicle. This function
will enable or disable the radio's ability to play video in the front seat. If enabled, the radio will play video when the vehicle is in Park
(Automatic Transmission) or when the parking brake is set and vehicle speed is zero (Manual Transmission). If disabled the radio will
NOT play video in the front seat in any operating mode. If it becomes necessary to disable the front seat video option, use the following
procedure.
NOTE:
Using the wiTECH Diagnostic Application for flashing an ECU is made available through the wiTECH Diagnostic Application. For
instructions select the "HELP" tab on upper portion of the wiTECH window, then "HELP CONTENTS." This will open the Welcome to
wiTECH Help screen were help topics can now selected.
1. Connect the wiTech
2. From the Home Screen select Radio
3. Select "Misc. Functions"
4. Select "Enable/Disable Front Seat Video"
5. Select "Enable" or "Disable" as required by your state laws.
6. Select finish to exit.
POLICY:
Information Only
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.
